Milling machine

harich (DECKEL) B (FP 2) mit CE

Condition: reconditioned (used), Universal tool milling machine Gnounhfk0 Make: harich (DECKEL) Model: A (FP 1) overhauled with CE geometric acceptance with test report with warranty Accessories: - Fixed table - Vertical milling head SK 40 with tightening thread S 20 x 2 - Coolant device - Operating instructions CE and safety equipment: - New switch cabinet in accordance with current safety regulations - Cover cap on the vertical milling head with electrical fuse protection - Feed protection hood with electrical fuse protection - Drive motor with brake function - Control panel with emergency stop, enable, start and stop buttons - New documentation for machine and control cabinet - CE declaration of conformity

feed length X-axis: 560 mm, feed length Y-axis: 500 mm, feed length Z-axis: 410 mm, Condition: used, CNC Universal Tool Milling Machine Fabr. Deckel Type FP 4 NC Machine # 2810-3345 Year 1984 with CNC control Dialog Technical data: Working area Travel x (longitudinal) 560 mm Travel y (transverse) 500 mm Travel z (vertical) 410 mm Table size ( universal table rotatable, tiltable, inclinable ) 430 x 710 mm Spindle speeds vertical 6300 rpm Spindle speeds horizontal 31.5 to 3150 rpm Spindle holder SK 40 Quill stroke 80 mm Feed drive Feed speed programmable 2- 3600 mm/ min Rapid traverse for X-, Y-axis 6000 mm/ min Rapid traverse for Z axis 6000 mm/ min Smallest single step (electronic handwheel) 0.01 mm Drive power 2 / 4 kW Weight 2.3 tons With - CNC control Dialog 2 - rigid table D7udvzo Used

travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 3,150 rpm, spindle speed (min.): 31 rpm, rapid traverse X-axis: 4,000 mm/min, rapid traverse Y-axis: 4,000 mm/min, rapid traverse Z-axis: 4,000 mm/min, table length: 390 mm, table width: 620 mm, overall weight: 2,000 kg, Year of construction: 1989, Condition: refurbished (used), Functionality: fully functional, Equipment: Documentation/manual, Rotational speed infinitely variable, DECKEL FP2 NC. Machine has been completely overhauled. OVERHAUL: Guides ground in / bearings new (spindle, gearbox etc.) / support scraped in / strips new / wear parts renewed / system completely cleaned / spindle cone reground etc. The machine is fully functional. Blxj8r0qn9u An inspection of the machine on site or by video call can be arranged! VAT will be shown on the invoice! Data: Spindle speed 31.5 to 3150 rpm, tool holder SK 40, feed rate 2 to 3600 mm/min, rapid traverse 4000 mm/min, travel X 300 mm, Y 300 mm, Z 400 mm, clamping groove table with 4 grooves, clamping surface 620 x 390 mm, DECKEL DIALOG 4 control, spindle head can be swiveled 180°

Year of construction: 1970, Condition: used, machine/vehicle number: 6473, Weight: approx 2 t. dimensios: 1 x 1 x 1,5m Cowoww8tpy

Year of construction: 1980, Condition: used, x-travel 390/400 mm y-travel 210/220 mm z-travel 390/400 mm turning speeds 25-2500 U/min feed 8-400 mm/min rapid traverse 1500 mm/min quill stroke 100 mm tool taper Sk 40 x S 20 x 2 drive motor 2,0/3,0 kW total power requirement kW weight of the machine ca. 1,2 t dimensions of the machine ca. m Optical condition: good Mechanic: good The machine can be viewed under current. 380 V, 50 Hz, with CEE plug and cable Colour: repainted upper part RAL 6011 green On request, the machine can be converted and adapted to the Machinery Directive, this would include the following: + Swivelling milling spindle guard, integrated in "emergency stop" chain! + Emergency stop switch, latching + Free-running safety handwheels + Motor brake + Lockable main switch + Mandatory and prohibition signs Accessories: Mre800x9x2 * 3-axis active digital readout (HH) TNC 111 * Vertical/horizontal Sk 40 milling spindle * Coolant device * Central lubrication pump * Stepless feed * New wipers * New bellows * Rigid angled table * 4 machine shoes * Cold light lamp * Major maintenance carried out * Operating instructions, spare parts list, circuit diagram * Operating key and drive ring Machine is workshop tested and with electrical acceptance certificate!

Condition: used, machine/vehicle number: 2801-0234, x-travel:300 mm y-travel:220 mm z-travel:400 mm surface area:620 x 390 mm turning speeds:31 - 3150 U/min feed range:1 - 3600 mm/min rapid traverse:4000 m/min spindle taper:SK 40 milling-head swivable +/-:90° quill stroke:60 mm total power requirement:1,09 / 2,0 / 4,0 kW weight of the machine ca.:1,3 t dimensions of the machine ca.:1,3 x 1,1 x 1,6 cm m Deckel FP2 NC Milling Machines. - Spilndle Head can be swiveled left or Right (90 °) Cy3njiky - Angular Fixed Work Table: 620 x 390 mm (Max. Load 250 kg) - Hydralic Tool clamping system SK40 with Pull studs DIN 2080 or DIN 69872 - Electronic handwheel for Easy Axis movement - Deckel Dialog 4 CNC control Systems - Mechanical hand-wheels for all axes to operate manually, Central Lubricant system, Chip tray with Splash cabin

travel distance X-axis: 400 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, overall weight: 1,100 kg, Condition: good (used), Functionality: fully functional, machine/vehicle number: 8018, Good to very good condition DECKEL FP 2 universal milling machine with extensive accessories With tilting and swivel table, machine vice, collets, milling cutters, etc. (see photos) Ipm23p9s Drive motor has been replaced, bellows checked and/or replaced. Fully functional, can be inspected under power at any time.

Year of construction: 1976, Condition: used, x-travel 400 mm y-travel 220 mm z-travel 400 mm spindle taper ISO 40 spindle turning speed range 25 - 2500 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1200 mm/min creep feed 4 mm/min control Heidenhain TNC 113 total power requirement 4,4 kW weight of the machine ca. 1500 kg dimensions of the machine ca. 1,6 x 1,2 x 1,8 m Condition: ready for operation Video(s) available on our website. Electric 380 Volt Switch gear cabinet ( separate ) Angle table ( fixed ) 700 x 330 mm Taper diverse Bellows with slats of aluminium Protection cabin bottom tray Machinefeets Bn7seodn with active digital display "Heidenhain TNC 113", for automatic retraction of preselected slide positions in absolute and incremental travel, autom. feeds stepless in x + z axis, sliding upper arm 100 mm. Machine dealer with own stock of 1600 m².

feed length X-axis: 560 mm, feed length Y-axis: 500 mm, feed length Z-axis: 410 mm, Year of construction: 1984, Condition: used, CNC Universal Tool Milling Machine Fabr. Deckel Type FP 4 NC Machine # 2810-3223 Year 1984 with CNC control Dialog Technical data: Working area Travel x (longitudinal) 560 mm Travel y (transverse) 500 mm Travel z (vertical) 410 mm Table size ( universal table rotatable, tiltable, inclinable ) 430 x 710 mm Spindle speeds vertical 6300 rpm Spindle speeds horizontal 31.5 to 3150 rpm Gd82wkyi Spindle holder SK 40 Quill stroke 80 mm Feed drive Feed speed programmable 2- 3600 mm/ min Rapid traverse for X-, Y-axis 6000 mm/ min Rapid traverse for Z axis 6000 mm/ min Smallest single step (electronic handwheel) 0.01 mm Drive power 2 / 4 kW Weight 2.3 tons With - CNC control Dialog 2 - rigid table used, in good condition

Condition: like new (used), x-travel:300 mm y-travel:220 mm z-travel:400 mm Bv29plzi surface area:620 x 390 mm turning speeds:31 - 3150 U/min feed range:1 - 3600 mm/min rapid traverse:4000 m/min

Year of construction: 1980, Condition: used, x-travel 390/400 mm y-travel 210/220 mm z-travel 390/400 mm turning speeds 25-2500 U/min feed 8-400 mm/min rapid traverse 1500 mm/min quill stroke 100 mm tool taper Sk 40 x S 20 x 2 drive motor 2,0/3,0 kW total power requirement kW weight of the machine ca. 1,2 t dimensions of the machine ca. m Optical condition: good Mechanic: good The machine can be viewed under current. 2202 11050 380 V, 50 Hz, with CEE plug and cable Color green Equipment: * 3 Axis Active Digital Display (HH) TNC 113 * Vertical head Sk 40 * Coolant device * Centralized lubrication pump * Free-running safety wheels * Stepless feed * Emergency stop switch * Engine brake * New scrapers * New bellows * Great maintenance done Bax8v0w9lt7 * Lockable main switch * 10 tool holders * fixed angle table (planed) * Chip tray * 4 machine shoes * Cold light lamp * Instruction manual, spare parts list, circuit diagram * Control key u. driver ring Machine is workshop tested and with electrical acceptance protocol!

Condition: used, machine/vehicle number: 2819-0517, x-travel:300 mm y-travel:300 mm z-travel:400 (340 with Apron) mm surface area:390 x 620 / Chip tray mm turning speeds:40- 2500 U/min feed range:02 - 3600 mm/min rapid feed:4,0 m/min control:Contour 3 - 3D path Control System spindle taper:SK40 quill stroke:60 mm Czri2se8 milling-head swivable +/-:90* spindle drive motor:2,0 kW total power requirement:1,6 / 2,0 kW weight of the machine ca.:1,3 t dimensions of the machine ca.:1,8 x 1,8 x 1,8 m Deckel FP2A Universal Milling Machine - Spilndle Head can be swiveled 90 °, can be used as vertical and horizontal machining Center. - Rigid Angle Table: 620 x 390 mm (Max. Load 250 kg) - Extendible sleeves: vertically 80 mm, horizontally 60 mm - Hydralic clamping system SK40 with Pull studs DIN 2080 or DIN 69872 Seperate Power Cabin, Central Lubrication and Coolant System, Chip tray and Splash Gaurd

Condition: used, Current new entry : 5267 + 5268 2 x COVER FP 2 A / 2819 Cma92vug37 Contour 3 rigid table + chip tray

Condition: refurbished (used), Heidenhain 3-axis digital display x = 400 y = 200 z = 400 Large extension head 300 mm additionally movable Rigid angular table - newly overhauled- Speed 40 - 2000 rpm Borpinolen SK 40 in the vertical and horizontal spindle extendable Safety handwheels with freewheel feed in all axes Coolant system -new- The machine is of the entire mechanics, as well as from the guides in a completely unworn condition. The geometry corresponds to a new machine. The mechanics of the machine has been extensively overhauled by us. Bellows were renewed. Rigid angular table -has been overhauled-. Coolant system completely renewed. The machine is ideally suited for precise and accurate milling work. 2twzyu milling work.

Condition: used, 3 axes digital display Heidenhain ND780 Cooling device Mechanical central lubrication Rigid angle table X-way 400 mm Ep9y3xl Y-way 220 mm Z-path 400 mm Speed 25 - 2500 rpm feed stepless in 3 axes Rapid feed in 3 axes Spindle brake Vertical milling head movable on spindle stand 150 mm Vertical quill and horizontal quill - SK 40 extendable Tightening system S20x2 Weight approx. 1400 kg

Condition: good (used), Used adjustable angle table suitable for cover FP 2 table size approx. 690 x 280 mm weight approx. 50 - 60 kg Item location: 589425 Unna The machine can be inspected. A forklift is available for loading. It is possible to examine the items for sale professionally on site. Specific questions should be clarified in advance. The information, e.g. technical data, dimensions, year of manufacture, condition are non-binding and are given to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is excluded. The goods are sold ex location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on your behalf. This offer is only aimed at traders, dealers and legal entities. Company names and trademarks are the property of their owners and serve only to identify and describe the products. M2oeddmbgh The installation and electrical connection of the machine/device must be carried out or checked by a trained specialist. Please also take a look at my other offers. Unless otherwise agreed, the item MUST be paid for and collected within 14 days of invoicing. Otherwise the costs for storage will be charged.

Condition: excellent (used), Friedrich Deckel FP 2 LB tool milling machine The accessories are not included in the scope of delivery, but can be purchased additionally. This universal milling machine FP 2 LB from the renowned German manufacturer Friedrich Deckel in Munich has as a special feature an extremely stable base body and is designed as a moving column machine, i.e. the machine does not lose accuracy if heavy parts (up to 1000 kg) are clamped. Another special feature is the so-called inclined bed of 45 degrees. This makes it possible, after dismantling the universal table, to clamp and machine especially V-engine blocks with 90-degree cylinder angle (e.g. American V8) directly. The long traverse path 800mm is also an advantage in this case. Cover FP 2 LB universal swivel / tilt table (± 45° / ± 15°) Lid universal dividing head Vise 160 mm Working range: X= 800 mm / Y= 300 mm / Z= 400 mm Bv0ihlc9v8 Transport possible on request. Please also note our other offers. Further articles - new and used - you will find in our store! International shipping costs on request!

Year of construction: 1962, Condition: good (used), Spindle mounting, vertical + horizontal SK / ISO 40 Angular table clamping surface 700 x 285 mm X-axis travel 500 mm Y-axis 200 + approx. 250 mm Z-axis 400 mm Quill stroke approx. 80 mm 18 main spindle speeds 40 - 2000 rpm 18 feed speeds 8 - 400 mm/min rapid traverse 1200 mm/min drive power 2,2 kW dimensions L x W x H 1150 x 1050 x 1650 mm Cav3afanr Machine weight 1000 kg Accessories / special features: - Vertical milling head, swiveling R/L - Fixed angle clamping table - Feed + rapid traverse in all axes Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, No. 5032: 1 branded universal tool milling machine make DECKEL type FP 2 active ( 2202 ) year of construction 1981 3-axis active digital display Heidenhain working area: 400 x 220 x 400 mm drive power: 2 kW equipment: Rigid table / angular table 700 x 330 mm Foldable splash guard with chip tray Machine feet, Jxmvcm Documentation Other: Spindle mounting SK 40 / M 16 Speed range 25 - 2,500 min-1 Space requirement approx. 2.5 x 1.8 x 1.8 m Weight approx. 1,5 to Immediately available from stock Machine can be seen and tested under power

Condition: good (used), used universal tool milling machine make DECKEL type FP 2 travel X: 400 mm Y: 200 mm Z: 400 mm table size 700 x 285 mm spindle mounting SK 40 - S20 x 2 spindle speed 40 - 2000 rpm. 18 steps feed rate 8 - 400 mm/min. 18 steps pinol stroke 60 mm motor power approx. 2,2 kW mains connection 380 volt, 50 Hz - vertical milling head swiveling, with pinol shift 60 mm 82vpffsgrg - Control cabinet adjacent space requirement L x W x H 1300 x 1200 x 1650 mm weight approx. 1200 kg good condition there is the possibility ,after agreement, the machine with receptacles accessory cabinet milling fixtures and other original cover accessories accessories.

Year of construction: 1984, Condition: reconditioned (used), Universal tool milling machine U38oollee Make: DECKEL Model: FP 1 Active Year of construction: 1984 - overhauled, new painted, RAL7035 light grey / RAL7012 basalt grey RAL5008 grey-blue machine no.: 2101-1067 milling head type: 2171 Milling head number: 1086 with warranty geometric acceptance with test report accessories: - 3-axis active digital display HEIDENHAIN TNC 113 with active function in X- and Z-axis - fixed table 600 x 200 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - coolant device - operating instructions - used as seen -

Condition: used, No. 5290: 1 used universal tool milling machine make DECKEL type FP 2 NC / 2801 year 1983 Dialog 2 contouring control working area: 300 x 220 x 400 mm drive power: 1,6/2 kW Rigid table with chip tray Spindle SK 40 Speed range up to 3150 min-1 Spindle sleeve stroke 65 + 60 mm Space requirement approx. 3 x 3.5 m Transport dimensions approx. 2 loading metres Weight approx. 1300 kg 7awgwxtcq2

Year of construction: 1978, Condition: refurbished (used), Universal tool milling machine Make: DECKEL Model: FP 1 with stepless feed 8bcdzlirw year of construction: ca. 1975 - partly overhauled, new painted, RAL7035 light grey / RAL7012 basalt grey / RAL5012 light blue with warranty geometric acceptance with test report accessories: - 3-axis digital display FAGOR Innova 30i-M, new - fixed table 600 x 250 (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - cooling device - operating instructions - used, as seen -

Year of construction: 1978, Condition: reconditioned (used), Universal tool milling machine Make: DECKEL Model: FP 2 stepless year of construction: 1978 - overhauled, new painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey-blue machine no.: 2202-10147 with warranty geometric acceptance with test report 2rosum accessories: - 3-axis digital readout HEIDENHAIN ND 780 - Universal table 700 x 240 mm (T-slot: 12 mm) - SK 40 vertical milling head with tightening thread S 20 x 2 - Central lubrication, manually operated - Coolant device - Operating instructions - used, as seen -

Year of construction: 1983, Condition: reconditioned (used), Universal tool milling machine Make: DECKEL Model: FP 2 Active year of construction: 1983 - overhauled, new painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey-blue machine no.: 2202-10799 milling head type: 2271 Milling head number: 300-1406 with warranty geometric acceptance with test report accessories: - 3-axis active digital display HEIDENHAIN TNC 111 Bmps9jgtje - fixed table 700 x 280 mm (T-slot: 12 mm) - Vertical milling head SK 40 with tightening thread S 20 x 2 - Central lubrication, manually operated - coolant device - Operating instructions - used, as seen -