Help Loading European Hyper Bishi Bashi Champ

[8Bit-1Up Amusements]

I don’t suppose anyone has any experience with European Hyper Bishi Bashi Champ JAMMA boards?

Took the JAMMA board out the cab to clean it and then tested it on a Supergun. Everything loads okay until it comes to a Hardware Unmatched error and then resets. I’ve read the issue might be the RTC? Anyone have any ideas? The European Jamma board seems to be very different from the Japanese one. The Japanese Jamma comes with a CD drive and the European one doesn’t from what I can see?

 

[big10p]

Maybe it's refusing to boot because it can't detect the dedicated controls the game uses.

 

[Retroman839]

is a cf card in the drive?

it’s just i can’t see it

 

[8Bit-1Up Amusements]

Maybe it's refusing to boot because it can't detect the dedicated controls the game uses.

Thanks for the tip, I’ll plug back into the cab and report back tomorrow

 

[8Bit-1Up Amusements]

is a cf card in the drive?

it’s just i can’t see it

It didn’t come with one, do I need one? And if so, where’s the best place to buy a replacement?

 

[8Bit-1Up Amusements]

8Bit-1Up Amusements2021-11-16 22:13:44

 

[8Bit-1Up Amusements]

I’ve noticed no access slot for the CF card on the metal casing unlike the Japanese version, so I’m assuming it’s not crucial for functionality in the European version?

8Bit-1Up Amusements2021-11-18 10:11:36

 

[slowcade]

Did it work when you put it back into the cabinet? Maybe there's an issue with the supergun. If it worked without a pcmcia card before it shouldn't be needed.

I've read that the id of the system 573 motherboard and the dongle must match, so maybe the dongle is not connected properly or doesn't get power?