WHITE AND CLEAR OVAL EGRET AND CATTAILS RIGHT (Reversed) 10.5 inches X 16 inches VINYL STATIC CLING WINDOW DECAL

****Note: This decal is white and clear only. There is no other color on this decal. Any color you see in the photos is just the background scenery. This is an oval decal, not square.****

This beautiful oval decal is a non-adhesive, static cling, vinyl decal that has the look of real etched glass for a fraction of the cost. These elegant decals are removable and reusable (see installation instructions below). These are easy to use quickly to any shiny smooth glass or plastic surface. Apply them to mirrors, sliding glass doors, patio doors, windows, entrance doors, shower doors, RV’s, boats, etc.

SIZE: 10.5 INCHES WIDE BY 16 INCHES HIGH

ALSO AVAILABLE IN OTHER SIZES (Listed and sold separately)

4 inches x 6 inches
8 inches x 12 inches
15 inches x 23 inches
21 inches x 33 inches

Egret and Cattails Right Facing decal also available (listed and sold separately)

Only one side of this decal is static cling so only one side can be applied to the glass. To get the look that you want, if placing the decal on the inside of your glass, a left facing Egret and Cattails will be facing to the left while looking at it from the outside, just as a right facing Egret and Cattails will be facing to the right if looking at it from the outside.


INSTALLATION INSTRUCTIONS

1. Clean hands thoroughly to prevent any dirt/oils from adhering to the surface of the decal. Also clean the area where decal will be applied thoroughly with window cleaner and wipe dry with a lint-free cloth.***Note*** Do Not allow the backing paper that is against the decal to get wet!!! If backing paper gets wet, you will not be able to remove the decal from it and it will be ruined.

2. Spray cleaned glass "very" liberally (Wetter is always better) with water or glass cleaner before applying decoration. A substantial amount of moisture is required between the decal and surface to give an even appearance once fully dried. Never install on a dry surface.

3. With dry hands, peel the decal from the backing paper. Lightly spray the back side (shiny side) of decal with water or glass cleaner. This will prevent it from clinging to itself and aid in its application. REMEMBER it is necessary to place the side of the decal that is against the backing paper to the glass. It will not adhere on etched side!

***Place the shiny side of the decoration against the wet surface and then position it by sliding and moving into the desired location. Using a rubber-tipped squeegee, plastic driver's license or credit card (making sure there are no rough edges), work from the center outward and squeegee out "all" the excess air and moisture. Then, wipe dry with a lint-free cloth